数控弯曲机sgw42d-4  digital controlled steel bar bender sgw42d-4
 
技术参数technical data



产品优点
★箱体采用全封闭式设计，可杜绝在重负荷时机器变形和装卸机器漏油现象发生。
★内部中间轴，中间轴齿轮，输入轴，输出轴，中间轴，工作盘，停止块、桩头套，均采用淬火、回火、高频等热处理过的优质合金钢，12mm厚的箱体，可重负荷载工作，使用寿命长。
★采用防尘制动电机，行程开关，在紧急停止和重启状态下也能保证弯曲角度的精确性。
★插入式的定位销，可移动式桩头，可精确调节弯曲角度。
★数字操控箱，可记忆和一次性进行4个弯曲角度的设置，精确度高，操作简单。
advantages of the products
★sgw42d-2 adopts the fully enclosed gear box separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine.
★main-shaft gear, input-shaft gear, main shaft, input shaft, central shaft, working disk, saddles, stop gauge, pile head and pile head casing made of high-quality alloyed steel with proper heat treatment (quenching/ tempering/ high frequency) and 3mm thick external case to ensure reliable performances also under heavy loads and long working life.
★dust proof brake motor and limit-switch to ensure the accuracy of the bending angle also after stopping and restarting.
★insert-pin type disk and movable saddles for a precise adjusting of the bending angle.
★digital control panel cabinet (see pic.), which can memorize until 4 bending settings, for an accurate adjustment and for easier operations.

---

成都固特机械有限责任公司
王洲
15008415853
交大路260号旺座C302室